<![CDATA[M5Stick C unable to upload code after clock example loaded]]>Hi,
Testing out StickC, I uploaded the clock example. However, the USB port is now no longer seen from the Arduino IDE. I also have a M5Stick (grey) and that connects fine. Is there a way to factory reset / other way to resolve this? Thanks

]]>https://community.m5stack.com/topic/1193/m5stick-c-unable-to-upload-code-after-clock-example-loadedRSS for NodeWed, 29 Apr 2026 15:36:36 GMTTue, 06 Aug 2019 08:53:38 GMT60<![CDATA[Reply to M5Stick C unable to upload code after clock example loaded on Wed, 16 Oct 2019 08:46:19 GMT]]>Have you tried to erase the flash memory with the M5Burner or firmware uploader inside UIFlow offline IDE?

]]>https://community.m5stack.com/post/5999https://community.m5stack.com/post/5999Wed, 16 Oct 2019 08:46:19 GMT<![CDATA[Reply to M5Stick C unable to upload code after clock example loaded on Wed, 16 Oct 2019 00:04:29 GMT]]>@graemea try my fix here

]]>https://community.m5stack.com/post/5991https://community.m5stack.com/post/5991Wed, 16 Oct 2019 00:04:29 GMT<![CDATA[Reply to M5Stick C unable to upload code after clock example loaded on Wed, 07 Aug 2019 08:12:44 GMT]]>Hi, thanks for the reply - yep tried power off/on plus various combinations of button presses. Nothing appears to bring the USB back "on-line".

]]>https://community.m5stack.com/post/5057https://community.m5stack.com/post/5057Wed, 07 Aug 2019 08:12:44 GMT<![CDATA[Reply to M5Stick C unable to upload code after clock example loaded on Tue, 06 Aug 2019 09:05:17 GMT]]>Have you tried switching the stick c off and on again? May sound silly but occasionally they needs to be properly power cycled other wise connections are lost.

Another option is to use M5Burner to wipe the code from the device.

]]>https://community.m5stack.com/post/5043https://community.m5stack.com/post/5043Tue, 06 Aug 2019 09:05:17 GMT