<![CDATA[M5burner on windows7 cannot flash]]>Hi
I just received my M5stickC and wanted to play with UIFlow so I downloaded M5burner and the appropriate firmware. M5burner says it's OK to erase but it cannot burn the firmware
"Error loading Python DLL 'C:\Users\xxx\AppData\Local\Temp_MEI68722\python36.dll'.
LoadLibrary: The specified module could not be found."
I do have Python on this computer.
I checked but the folder AppData\Local\Temp_MEI68722\ does not exist
Where should I put python36.dll so m5burner "finds" it ?

]]>https://community.m5stack.com/topic/1289/m5burner-on-windows7-cannot-flashRSS for NodeWed, 29 Apr 2026 01:32:11 GMTWed, 04 Sep 2019 18:59:51 GMT60<![CDATA[Reply to M5burner on windows7 cannot flash on Sat, 07 Sep 2019 19:23:52 GMT]]>@ariane98
It works now, after some minor changes
Thanx again

]]>https://community.m5stack.com/post/5520https://community.m5stack.com/post/5520Sat, 07 Sep 2019 19:23:52 GMT<![CDATA[Reply to M5burner on windows7 cannot flash on Sat, 07 Sep 2019 15:31:11 GMT]]>@ariane98
Regarding you guide, I uploaded it and the screen shows 4 "Labels" saying Text. It does not mention wifi connexion, or failed connexion

]]>https://community.m5stack.com/post/5518https://community.m5stack.com/post/5518Sat, 07 Sep 2019 15:31:11 GMT<![CDATA[Reply to M5burner on windows7 cannot flash on Sat, 07 Sep 2019 06:22:46 GMT]]>@lukasmaximus
kids from 8 to 14
I've had workshops with "bare" ESP32 and an online coding tool
Interesting but too complex to be fun for kids

]]>https://community.m5stack.com/post/5512https://community.m5stack.com/post/5512Sat, 07 Sep 2019 06:22:46 GMT<![CDATA[Reply to M5burner on windows7 cannot flash on Fri, 06 Sep 2019 01:18:27 GMT]]>@Ariane98 you can check out my guide for simple webserver, it's written for the M5Stack in micropython, but you shouldn't have any problems running it on the stick c https://www.hackster.io/lukasmaximus89/m5stack-micropython-simple-web-server-20a4c4

I'm curious to know what age students were you thinking of using the stick c to teach with?

]]>https://community.m5stack.com/post/5490https://community.m5stack.com/post/5490Fri, 06 Sep 2019 01:18:27 GMT<![CDATA[Reply to M5burner on windows7 cannot flash on Thu, 05 Sep 2019 19:20:11 GMT]]>@ariane98 said in M5burner on windows7 cannot flash:

updated to 1.4.0 beta and that's OK now
Thank you
I've looked at your book...quite nice

Its still WIP and I am open to comments a criticism.

]]>https://community.m5stack.com/post/5488https://community.m5stack.com/post/5488Thu, 05 Sep 2019 19:20:11 GMT<![CDATA[Reply to M5burner on windows7 cannot flash on Thu, 05 Sep 2019 19:17:36 GMT]]>updated to 1.4.0 beta and that's OK now
Thank you
I've looked at your book...quite nice

]]>https://community.m5stack.com/post/5487https://community.m5stack.com/post/5487Thu, 05 Sep 2019 19:17:36 GMT<![CDATA[Reply to M5burner on windows7 cannot flash on Thu, 05 Sep 2019 19:10:46 GMT]]>@ajb2k3
I get the same I2C bus error
If I upload it to the stick I get a grey screen with no data displayed

]]>https://community.m5stack.com/post/5486https://community.m5stack.com/post/5486Thu, 05 Sep 2019 19:10:46 GMT<![CDATA[Reply to M5burner on windows7 cannot flash on Thu, 05 Sep 2019 18:47:35 GMT]]>Don't know about the web server but here is my imu test file
https://github.com/Ajb2k3/UIFlowHandbook/blob/master/main (8).m5f

]]>https://community.m5stack.com/post/5483https://community.m5stack.com/post/5483Thu, 05 Sep 2019 18:47:35 GMT<![CDATA[Reply to M5burner on windows7 cannot flash on Thu, 05 Sep 2019 18:43:05 GMT]]>@ajb2k3
is it possible too use the stick as a vry simple webserver?

]]>https://community.m5stack.com/post/5482https://community.m5stack.com/post/5482Thu, 05 Sep 2019 18:43:05 GMT<![CDATA[Reply to M5burner on windows7 cannot flash on Thu, 05 Sep 2019 18:41:29 GMT]]>@ajb2k3
I am using UIFlow online too, but no luck with IMU...

]]>https://community.m5stack.com/post/5481https://community.m5stack.com/post/5481Thu, 05 Sep 2019 18:41:29 GMT<![CDATA[Reply to M5burner on windows7 cannot flash on Thu, 05 Sep 2019 18:34:52 GMT]]>@ariane98 Its strange because all I use is UIFlow and I am writing an english book on it (samples available to download in the projects forum)
For the current M5StickC competition i'm using the IMU in my project however, I'm using the online version and programming over wifi.

]]>https://community.m5stack.com/post/5480https://community.m5stack.com/post/5480Thu, 05 Sep 2019 18:34:52 GMT<![CDATA[Reply to M5burner on windows7 cannot flash on Thu, 05 Sep 2019 18:17:19 GMT]]>@ajb2k3
Thanks for your help
I intended to use m5stick with kids but maybe it's too early...
Both UIFlow and Arduino environments seem still unpredictable

]]>https://community.m5stack.com/post/5479https://community.m5stack.com/post/5479Thu, 05 Sep 2019 18:17:19 GMT<![CDATA[Reply to M5burner on windows7 cannot flash on Thu, 05 Sep 2019 18:09:53 GMT]]>Ok I'm running 1.4 and getting a syntex error.
Try upgrading to 1.4.0 beta and try again.

]]>https://community.m5stack.com/post/5478https://community.m5stack.com/post/5478Thu, 05 Sep 2019 18:09:53 GMT<![CDATA[Reply to M5burner on windows7 cannot flash on Thu, 05 Sep 2019 18:08:39 GMT]]>Strangely, it does light the led when I use digitalWrite(10, HIGH) but then nothing happens with digitalWrite(10, LOW)
If I use digitalWrite(10, LOW) first, it sets the led ON...

]]>https://community.m5stack.com/post/5477https://community.m5stack.com/post/5477Thu, 05 Sep 2019 18:08:39 GMT<![CDATA[Reply to M5burner on windows7 cannot flash on Thu, 05 Sep 2019 18:04:31 GMT]]>@ariane98 said in M5burner on windows7 cannot flash:

btw, in arduino, how do you access the built in red led?
Docs showed pin 10 but it's no working...

Try GPIO10

]]>https://community.m5stack.com/post/5476https://community.m5stack.com/post/5476Thu, 05 Sep 2019 18:04:31 GMT<![CDATA[Reply to M5burner on windows7 cannot flash on Thu, 05 Sep 2019 17:14:42 GMT]]>btw, in arduino, how do you access the built in red led?
Docs showed pin 10 but it's no working...

]]>https://community.m5stack.com/post/5475https://community.m5stack.com/post/5475Thu, 05 Sep 2019 17:14:42 GMT<![CDATA[Reply to M5burner on windows7 cannot flash on Thu, 05 Sep 2019 17:13:08 GMT]]>Orange

]]>https://community.m5stack.com/post/5474https://community.m5stack.com/post/5474Thu, 05 Sep 2019 17:13:08 GMT<![CDATA[Reply to M5burner on windows7 cannot flash on Thu, 05 Sep 2019 17:09:42 GMT]]>@ariane98 Which stick?
The old black or the Orange Stick C?

]]>https://community.m5stack.com/post/5473https://community.m5stack.com/post/5473Thu, 05 Sep 2019 17:09:42 GMT<![CDATA[Reply to M5burner on windows7 cannot flash on Thu, 05 Sep 2019 17:01:52 GMT]]>Code runs on the stick, excepted whan I try to use IMU.
Both firmware and UIFlow are UIFlowv1.3.2

]]>https://community.m5stack.com/post/5472https://community.m5stack.com/post/5472Thu, 05 Sep 2019 17:01:52 GMT<![CDATA[Reply to M5burner on windows7 cannot flash on Thu, 05 Sep 2019 16:08:40 GMT]]>Your first issue on the first PC is that for some reason UIFlow is looking at the 2.7 version and not the 3.6 version of python. Check your python environmental setup as this happens if the environment is wrong (I used to get this often when running 2 version of python.

Second issue. what hardware are you running, what firmware version are you running and what version of UIFlow are you running?
It sounds like you haven't got UIFlow set to M5Stick.

]]>https://community.m5stack.com/post/5470https://community.m5stack.com/post/5470Thu, 05 Sep 2019 16:08:40 GMT<![CDATA[Reply to M5burner on windows7 cannot flash on Thu, 05 Sep 2019 12:18:56 GMT]]>and from arduino IDE I get values from IMU
So I guess it has with UIFlow interface to do ?

]]>https://community.m5stack.com/post/5466https://community.m5stack.com/post/5466Thu, 05 Sep 2019 12:18:56 GMT<![CDATA[Reply to M5burner on windows7 cannot flash on Thu, 05 Sep 2019 11:41:16 GMT]]>when I try the exact same blocks than in https://www.youtube.com/watch?v=zNxKkfbEkKU (label show get X gyr), I get this "I2C bus error(6)"

]]>https://community.m5stack.com/post/5465https://community.m5stack.com/post/5465Thu, 05 Sep 2019 11:41:16 GMT<![CDATA[Reply to M5burner on windows7 cannot flash on Thu, 05 Sep 2019 11:34:49 GMT]]>from m5stack import *
from m5ui import *
from uiflow import *
import imu

setScreenColor(0x111111)

imu0 = imu.IMU()
label0 = M5TextBox(27, 7, "AccX", lcd.FONT_Default,0xFFFFFF, rotate=0)

setScreenColor(0x33ff33)
lcd.font(lcd.FONT_DejaVu24)
lcd.print('FelX', 10, 30, 0xcc33cc)
wait(3)
while True:
label0.setText(str(imu0.acceleration[0]))
wait(1)
wait_ms(2)

]]>https://community.m5stack.com/post/5464https://community.m5stack.com/post/5464Thu, 05 Sep 2019 11:34:49 GMT<![CDATA[Reply to M5burner on windows7 cannot flash on Thu, 05 Sep 2019 10:38:15 GMT]]>@ariane98 show us your code

]]>https://community.m5stack.com/post/5463https://community.m5stack.com/post/5463Thu, 05 Sep 2019 10:38:15 GMT