Why: my sister in law was searching for a simple pag turner with the options to see for more features for the band. By connecting more page turners in groups.(not yet implemented)

Requirements:

• needs to work with ipad mini 2
• needs to be wireless
• needs to work on a battery charge for 1 hour at least (Test run for 1 hour and 15 min)
• about 200 page turns (800 tested)

Things used:
M5stack Atom Lite
M5stack tailbat
2 footswitches
Small piece of pcb
Headers
And 2 small cables with connectors
And a 3d printed case.

I’m writing the steps from the download the setup of the software (on windows) coming soon!!

Result:

I did not use the 2 button option via the groove connector.
Because of the voltage split. It will consume a small bit of current. But everything i could save is for the battery livespan.
So the esp is running at 160Mhz and not 240. I tried 80, but the consummed current was below the 50mA and the tailbat will turn off after 30 sec.

This was the initial pcb for testing.

But because i only need 3 pins i made a new one. ( post will be updated later)