<![CDATA[GoPlus2 UIFlow Block]]>I am trying to use Port B on a GoPlus2 module, attached to a Basic M5Core. The block to write to the Port appears to be

0_1613239675894_742130c0-0708-49d1-a5ee-2fe4d2c2b8be-image.png

I had expected to see a Set Block abd cannot understand how to utitilse this block to achieve a write.

Can anyone help?

Allan

]]>https://community.m5stack.com/topic/2950/goplus2-uiflow-blockRSS for NodeThu, 30 Apr 2026 06:38:18 GMTSat, 13 Feb 2021 18:09:14 GMT60<![CDATA[Reply to GoPlus2 UIFlow Block on Sun, 11 Apr 2021 09:48:04 GMT]]>I also connected GoPlus 2 to M5 Basic.
Next, I connected Relay Units to PortB_1 and PortB_2 respectively and confirmed the operation.
UIFlow Block is based on the image posted by ajb2k3_san.
I didn't have to use a block of Relay Units.
0_1618134404725_M5stack Basic with GoPlus2.png
0_1618134468368_PXL_20210411_094123026.jpg

]]>https://community.m5stack.com/post/13474https://community.m5stack.com/post/13474Sun, 11 Apr 2021 09:48:04 GMT<![CDATA[Reply to GoPlus2 UIFlow Block on Sun, 14 Feb 2021 11:41:06 GMT]]>The only thing I can think of is to do something like this using a set variable.
0_1613302856346_Screenshot 2021-02-14 at 11.40.28.png

]]>https://community.m5stack.com/post/12487https://community.m5stack.com/post/12487Sun, 14 Feb 2021 11:41:06 GMT