<![CDATA[M5Stamp C3 and Arduino IDE]]>I just ordered 5 pcs of new M5Stamp C3 and would like to know what ESP32 board I have to choose to program in Arduino IDE. I downloaded newest version of ESP32 boards but M5Stamp C3 isn't included.

]]>https://community.m5stack.com/topic/3697/m5stamp-c3-and-arduino-ideRSS for NodeWed, 29 Apr 2026 01:19:40 GMTFri, 29 Oct 2021 19:29:13 GMT60<![CDATA[Reply to M5Stamp C3 and Arduino IDE on Wed, 01 Dec 2021 10:26:12 GMT]]>@felmue said in M5Stamp C3 and Arduino IDE:

Hello @HaSch

The error message looks familiar - see this thread.

Thanks
Felix

I looked at this thread but it didn't work for me. Grounding Pin 9 and trying to flash ends with the same result.
How can I use another TTL2USB port? I only have the one provided using the board.

]]>https://community.m5stack.com/post/15672https://community.m5stack.com/post/15672Wed, 01 Dec 2021 10:26:12 GMT<![CDATA[Reply to M5Stamp C3 and Arduino IDE on Mon, 22 Nov 2021 20:41:56 GMT]]>I have this error on several devices now.

]]>https://community.m5stack.com/post/15566https://community.m5stack.com/post/15566Mon, 22 Nov 2021 20:41:56 GMT<![CDATA[Reply to M5Stamp C3 and Arduino IDE on Mon, 22 Nov 2021 19:27:34 GMT]]>Hello @HaSch

The error message looks familiar - see this thread.

Thanks
Felix

]]>https://community.m5stack.com/post/15565https://community.m5stack.com/post/15565Mon, 22 Nov 2021 19:27:34 GMT<![CDATA[Reply to M5Stamp C3 and Arduino IDE on Mon, 22 Nov 2021 18:29:41 GMT]]>@felmue Error message:

esptool.py v3.1
Serial port /dev/cu.usbmodem53220362951
Connecting....
Chip is unknown ESP32-C3 (revision 3)
Features: Wi-Fi
Crystal is 40MHz
MAC: xx:xx:xx:xx:xx:xx
Uploading stub...

A fatal error occurred: Failed to write to target RAM (result was 01070000)
A fatal error occurred: Failed to write to target RAM (result was 01070000)

]]>https://community.m5stack.com/post/15563https://community.m5stack.com/post/15563Mon, 22 Nov 2021 18:29:41 GMT<![CDATA[Reply to M5Stamp C3 and Arduino IDE on Mon, 22 Nov 2021 13:34:12 GMT]]>@felmue
Today, I received the boards but in Arduino IDE they seem not to work with board ESP32C3 Dev Module.

]]>https://community.m5stack.com/post/15559https://community.m5stack.com/post/15559Mon, 22 Nov 2021 13:34:12 GMT<![CDATA[Reply to M5Stamp C3 and Arduino IDE on Sat, 30 Oct 2021 09:15:12 GMT]]>@felmue said in M5Stamp C3 and Arduino IDE:

have look here. Check out section ESP32-S2 and ESP32-C3 Support

@felmue
Thank you Felix, that was the solution. I think it is ESP32C3 Dev Module.
Best regards,
Hans

]]>https://community.m5stack.com/post/15299https://community.m5stack.com/post/15299Sat, 30 Oct 2021 09:15:12 GMT<![CDATA[Reply to M5Stamp C3 and Arduino IDE on Fri, 29 Oct 2021 19:57:54 GMT]]>Hello @HaSch

have look here. Check out section ESP32-S2 and ESP32-C3 Support.

Thanks
Felix

]]>https://community.m5stack.com/post/15290https://community.m5stack.com/post/15290Fri, 29 Oct 2021 19:57:54 GMT