<![CDATA[Senseair S8 LP CO2-Calibrate]]>can I set the G26 pin on the M5StickCPlus to GND for about 5 seconds in software?
If so how would that be possible.

Enclosed an example for an ESP 8266

On CalibrateS8 do
GPIO,14,0
TimerSet,1,5
EndOn

On rules#timer=1 do
GPIO,14,2
endon

On System#Boot do
GPIO,14,2 // Sets GPIO14 (calibration PIN) to high impedance
EndOn

]]>https://community.m5stack.com/topic/4334/senseair-s8-lp-co2-calibrateRSS for NodeWed, 29 Apr 2026 04:12:19 GMTWed, 01 Jun 2022 11:17:11 GMT60