<![CDATA[BALA 2 not recognized in UiFlow 1.10]]>Whenever I run a program involving Bala2 on an M5CoreGREY it says that “Bala motor not connected” even though I didn’t change anything about it out of the box. (This error also applies to any other core that I use)

]]>https://community.m5stack.com/topic/4418/bala-2-not-recognized-in-uiflow-1-10RSS for NodeWed, 29 Apr 2026 09:36:51 GMTSun, 03 Jul 2022 20:20:32 GMT60<![CDATA[Reply to BALA 2 not recognized in UiFlow 1.10 on Mon, 11 Jul 2022 02:54:13 GMT]]>@hwtaro9 I've never seen bala 2 work with the UIFlow blocks they provide (are those even for the Bala2 or just Bala?).

When I had a UIFlow program on mine I had to set the i2c registers in python code (in an execute block), which works but implementing a PID loop in there wasn't something I wanted to do.

It would be great to have official UIFlow blocks for that robot though, it's really nice hardware.

]]>https://community.m5stack.com/post/17963https://community.m5stack.com/post/17963Mon, 11 Jul 2022 02:54:13 GMT<![CDATA[Reply to BALA 2 not recognized in UiFlow 1.10 on Sun, 03 Jul 2022 20:24:37 GMT]]>To be clear, this error occurred out of the box with a coreGREY, so I tried with a CoreFIRE and the same thing happened.

]]>https://community.m5stack.com/post/17899https://community.m5stack.com/post/17899Sun, 03 Jul 2022 20:24:37 GMT