<![CDATA[Clash between BLE functions & Grove input on an m5stick?]]>Have successfully used a Grove Light Sensor v.1.1 on the m5stick to get a report of light input (off of GPIO13). However, when I add BLE features to my sketch (e.g., BLEDevice.h, BLEUtils.h, BLEServer.h), it seems that GPIO13 pin is held high (non-responsive to ambient light anymore)... Does activating BLE on the ESP32 screw up with service to GPIO13 pin?

Any help for a n00b much appreciated, dsiderov

]]>https://community.m5stack.com/topic/449/clash-between-ble-functions-grove-input-on-an-m5stickRSS for NodeSun, 10 May 2026 22:59:28 GMTMon, 24 Dec 2018 20:16:39 GMT60<![CDATA[Reply to Clash between BLE functions & Grove input on an m5stick? on Thu, 21 Mar 2019 03:21:26 GMT]]>@dsiderov Using BLE will not affect GPIO13

]]>https://community.m5stack.com/post/3364https://community.m5stack.com/post/3364Thu, 21 Mar 2019 03:21:26 GMT