<![CDATA[Stepmotor Driver Module v1.1 (HR8825) M5STACK SKU: M039-V11 Question]]>Hi with Stepmotor Driver Module v1.1 I need to drive my stepper with the command in UI flow that's step/direction number /of steps but I can't find this when I load this module .

This is like what I required but this command is from another module.

![alt text](0_1704802589314_458d3289-0d89-4aab-b41f-0cfb6ac88871-image.png image url)

]]>https://community.m5stack.com/topic/5962/stepmotor-driver-module-v1-1-hr8825-m5stack-sku-m039-v11-questionRSS for NodeWed, 29 Apr 2026 19:36:20 GMTTue, 09 Jan 2024 12:17:34 GMT60<![CDATA[Reply to Stepmotor Driver Module v1.1 (HR8825) M5STACK SKU: M039-V11 Question on Wed, 24 Jan 2024 09:49:20 GMT]]>I confirmed that the sample code works. However, the micro step does not work well. The step width is the same even if I change the settings. Is there a special setup procedure?

]]>https://community.m5stack.com/post/23451https://community.m5stack.com/post/23451Wed, 24 Jan 2024 09:49:20 GMT<![CDATA[Reply to Stepmotor Driver Module v1.1 (HR8825) M5STACK SKU: M039-V11 Question on Fri, 12 Jan 2024 01:24:56 GMT]]>Hi @AshimotoK0, please try this example code. x, y and z motors can be controlled

0_1705022395564_f0ef145e-1673-421a-aba9-7bd0101fc587-image.png

]]>https://community.m5stack.com/post/23312https://community.m5stack.com/post/23312Fri, 12 Jan 2024 01:24:56 GMT<![CDATA[Reply to Stepmotor Driver Module v1.1 (HR8825) M5STACK SKU: M039-V11 Question on Thu, 11 Jan 2024 23:00:56 GMT]]>@pandian-nano Thanks .. with the M039-V11 is there a command in UIflow to Step a certain number of pulses ? As in the image I posted. I only need to use one axis (i.e only controlling one stepper motor)

]]>https://community.m5stack.com/post/23311https://community.m5stack.com/post/23311Thu, 11 Jan 2024 23:00:56 GMT<![CDATA[Reply to Stepmotor Driver Module v1.1 (HR8825) M5STACK SKU: M039-V11 Question on Wed, 10 Jan 2024 01:57:19 GMT]]>Hi @AshimotoK0
These two modules are different, stepmotor[sku m012 & m035] modules support g-code command and stepmotor driver[SKU:M039] does not support g-code command

]]>https://community.m5stack.com/post/23289https://community.m5stack.com/post/23289Wed, 10 Jan 2024 01:57:19 GMT