<![CDATA[AtomS3 Loops rst:0x3 (RTC_SW_SYS_RST),boot:0x28 (SPI_FAST_FLASH_BOOT)]]>I am using the button Sample from AtomS3 example library.
Compling with Arduino IDE end ok.
Wrote 413840 bytes (232170 compressed) at 0x00010000 in 2.8 seconds (effective 1171.8 kbit/s)...
Hash of data verified.

Leaving...

After pressing Reset I get following messages in Serial Monitor:
18:40:36.017 -> ESP-ROM:esp32s3-20210327
18:40:36.017 -> Build:Mar 27 2021
18:40:36.017 -> rst:0x3 (RTC_SW_SYS_RST),boot:0x28 (SPI_FAST_FLASH_BOOT)
18:40:36.017 -> Saved PC:0x403cdada
18:40:36.017 -> SPIWP:0xee
18:40:36.017 -> mode:DIO, clock div:1
18:40:36.017 -> load:0x3fce3808,len:0x44c
18:40:36.017 -> load:0x403c9700,len:0xbd8
18:40:36.017 -> load:0x403cc700,len:0x2a80
18:40:36.017 -> entry 0x403c98d0

For all other programs it was the same ...
How can I get out off that loop?

]]>https://community.m5stack.com/topic/5972/atoms3-loops-rst-0x3-rtc_sw_sys_rst-boot-0x28-spi_fast_flash_bootRSS for NodeWed, 29 Apr 2026 08:41:22 GMTFri, 12 Jan 2024 17:51:38 GMT60