<![CDATA[M5stickC Plus 2 connecting SD card Module not working]]>I'm trying to run NEMO or Marauder using an SD card module at 3.3V made specifically for the ESP32 but even tho i followed the right wiring (Displayed below) Neither of them seem to be able to initialise my SD card.

Wiring:
M5 --> SD
GND --> GND
3.3v --> 3.3v
G0 --> CLK
G26 --> MISO
G32 --> MOSI
None --> CS

(Wiring found in https://community.m5stack.com/topic/5290/my-m5stickc-plus-can-t-read-micro-sd/3)

Does somebody know what the issue might be?

]]>https://community.m5stack.com/topic/6467/m5stickc-plus-2-connecting-sd-card-module-not-workingRSS for NodeWed, 29 Apr 2026 01:01:35 GMTMon, 13 May 2024 17:17:39 GMT60<![CDATA[Reply to M5stickC Plus 2 connecting SD card Module not working on Fri, 01 Nov 2024 01:15:50 GMT]]>Here is how I made it work:

  • CS Connects also to GND in M5.
  • Some Card adapters requires 5V to work (bigger ones)
  • Card must be formatted as FAT32
  • SD card capacity <=32G
]]>https://community.m5stack.com/post/26912https://community.m5stack.com/post/26912Fri, 01 Nov 2024 01:15:50 GMT<![CDATA[Reply to M5stickC Plus 2 connecting SD card Module not working on Wed, 15 May 2024 09:54:40 GMT]]>https://forum.m5stack.com/topic/1002/how-to-connect-sd-card-to-m5stickc

]]>https://community.m5stack.com/post/25249https://community.m5stack.com/post/25249Wed, 15 May 2024 09:54:40 GMT<![CDATA[Reply to M5stickC Plus 2 connecting SD card Module not working on Tue, 14 May 2024 17:36:46 GMT]]>@wh1t3_01l CS must be connected somewhere. I don't know the answer, but I know that without CS you can't have the SD card breakoutboard working.

]]>https://community.m5stack.com/post/25234https://community.m5stack.com/post/25234Tue, 14 May 2024 17:36:46 GMT