<![CDATA[GNSS module DIP settings - cannot understand]]>Hello,

can you please explain this documentation for DIP switches settings on GNSS module? How I can set it for the Core 2? DIPs are 0 or 1 but table has 3 columns.

Thank you

Snímek obrazovky 2024-05-28 v 20.27.23.png

]]>https://community.m5stack.com/topic/6511/gnss-module-dip-settings-cannot-understandRSS for NodeMon, 04 May 2026 09:45:06 GMTTue, 28 May 2024 18:43:14 GMT60<![CDATA[Reply to GNSS module DIP settings - cannot understand on Wed, 29 May 2024 17:24:16 GMT]]>@robski good! maybe THIS will help?

Screenshot 2024-05-29 at 1.09.15 PM.jpg

]]>https://community.m5stack.com/post/25425https://community.m5stack.com/post/25425Wed, 29 May 2024 17:24:16 GMT<![CDATA[Reply to GNSS module DIP settings - cannot understand on Wed, 29 May 2024 15:17:25 GMT]]>@oldrichsveda

by looking on the CORE2 table you can see that selection of gpio is :
PPS enabled dip is for G0
TXD enabled dip is for G14
RXD enabled dip is for G13

so to connect PPS/TXD/RXD you need G0/G14/G13

gnss0.jpg

]]>https://community.m5stack.com/post/25423https://community.m5stack.com/post/25423Wed, 29 May 2024 15:17:25 GMT<![CDATA[Reply to GNSS module DIP settings - cannot understand on Wed, 29 May 2024 05:01:38 GMT]]>@oldrichsveda Read the heading at the top of the columns.
First column is for the Core, middle column is for the Core2 and the third column is for the Core 3.
It is quite self explanatory.

]]>https://community.m5stack.com/post/25421https://community.m5stack.com/post/25421Wed, 29 May 2024 05:01:38 GMT<![CDATA[Reply to GNSS module DIP settings - cannot understand on Tue, 28 May 2024 21:18:56 GMT]]>@oldrichsveda
Screenshot 2024-05-28 at 5.11.33 PM.png
;)

]]>https://community.m5stack.com/post/25419https://community.m5stack.com/post/25419Tue, 28 May 2024 21:18:56 GMT