<![CDATA[Grove Male 2 Male adapter?]]>How do I connect the two small M5 modules with a male to male adapter? The grove cable works fine for me but I want a zero length grove male 2 male connection so I can print a 3D case and put both modules into it.

Thnx
Andreas

]]>https://community.m5stack.com/topic/6888/grove-male-2-male-adapterRSS for NodeWed, 29 Apr 2026 12:22:10 GMTSun, 13 Oct 2024 05:53:26 GMT60<![CDATA[Reply to Grove Male 2 Male adapter? on Wed, 15 Jan 2025 16:27:06 GMT]]>@brrainz @erickadengler you could just try removing the connector and solder wire between each unit or now that you have a prototype made with units, look up the circuit diagrams on the site and build a custom pcb containing the devices.

Another route is to learn how to make a custom cable/connector.
BTW the connectors on the devices are male and not female and so adapters must be female not male

]]>https://community.m5stack.com/post/27905https://community.m5stack.com/post/27905Wed, 15 Jan 2025 16:27:06 GMT<![CDATA[Reply to Grove Male 2 Male adapter? on Wed, 15 Jan 2025 07:21:22 GMT]]>@brrainz I think M5Stack are missing a trick, not having a male-male connector. I have a bunch of Neo Hex units I'd like to connect without lots of wires behind them.

]]>https://community.m5stack.com/post/27892https://community.m5stack.com/post/27892Wed, 15 Jan 2025 07:21:22 GMT