<![CDATA[RFID 2 + cardputer or stickC-plus2]]>Hi!
I have RFID 2 module and try to use it with cardputer or stickC-plus2 with Bruce on the board.
I am unable to read any NFC cards written by FlipperZero or NFC Tools.

When I try to read written cards I see

Device type: Mifare 1KB
UID: XX...
ATQA: 00 04
SAK: 08
[!]: Failed authenticating

Is my RFID 2 module broken?

I don't have an account on Discord to post on Bruce group - they demand phone number. LOL

]]>https://community.m5stack.com/topic/7804/rfid-2-cardputer-or-stickc-plus2RSS for NodeWed, 29 Apr 2026 10:02:29 GMTSat, 06 Sep 2025 13:41:05 GMT60<![CDATA[Reply to RFID 2 + cardputer or stickC-plus2 on Thu, 26 Mar 2026 09:24:27 GMT]]>Your authentication failed because you are missing the keys for the rfid card. It does work in bruce but it`s really slow.
you should notice that it does work when it pops out the uuid.
Somehow Bruce seem to have trouble when you have to many custom keys on the key file try to keep it a really short list.

]]>https://community.m5stack.com/post/30818https://community.m5stack.com/post/30818Thu, 26 Mar 2026 09:24:27 GMT<![CDATA[Reply to RFID 2 + cardputer or stickC-plus2 on Wed, 10 Sep 2025 06:37:37 GMT]]>@geex3 so test it first with official firmware/software to know if it works correctly

]]>https://community.m5stack.com/post/29911https://community.m5stack.com/post/29911Wed, 10 Sep 2025 06:37:37 GMT<![CDATA[Reply to RFID 2 + cardputer or stickC-plus2 on Wed, 10 Sep 2025 01:53:59 GMT]]>@robski said in RFID 2 + cardputer or stickC-plus2:

uiflow2

I have only tested my rfid 2 module with cardputer and stickC-plus2 with Bruce fw on board.

]]>https://community.m5stack.com/post/29910https://community.m5stack.com/post/29910Wed, 10 Sep 2025 01:53:59 GMT<![CDATA[Reply to RFID 2 + cardputer or stickC-plus2 on Mon, 08 Sep 2025 08:32:00 GMT]]>@geex3 is your rfid 2 works ok with uiflow2 or arduinoon same devices?

]]>https://community.m5stack.com/post/29905https://community.m5stack.com/post/29905Mon, 08 Sep 2025 08:32:00 GMT