<![CDATA[unit hbridget v1.1]]>Good afternoon,
I use UIFOLW 2 version 2.3.4 and Core basic.
I have purchased several Unit Hbridge modules with version 1.1.
When I run the "Set" commands, they work correctly, or so it seems.
ca2e6683-50cf-493a-9330-62aeb5331a49-image.png
When I add a "Get" command, the error shown on the screen appears.

989ccc60-7b91-4bd2-b631-56e933f1ae95-image.png
If I use UIFOLW 2 version 2.3.5, the battery data is incorrect.
I have purchased many M5stack products, and none of them work correctly; they all have errors.
I would like to know what is happening with this device because it loses I2C communication.
3740d381-3279-4abc-94a5-92d5694c5b44-image.png

And it stops working.
If I run this code, which is the one I'm interested in, I get the error shown on the screen.
0a6f9323-e35c-4f85-a8a5-0ee0e4227503-image.png
Error in the image
644580a3-0206-41f1-9a2c-575b16020f22-image.png
Has this happened to anyone else?
What am I doing wrong?
Or is it an I2C port error?

How can I see the I2C address of the Unit H Bridge device?

Thanks.

]]>https://community.m5stack.com/topic/7812/unit-hbridget-v1-1RSS for NodeWed, 29 Apr 2026 19:36:20 GMTThu, 11 Sep 2025 15:58:58 GMT60<![CDATA[Reply to unit hbridget v1.1 on Tue, 11 Nov 2025 17:46:35 GMT]]>@felmue
Thanks for replying. I'm currently using UIFlow2 v2.3.7. If I remove the "GET" commands, as shown in the image, it works without displaying these values, obviously.

I'm using Core Basic with the latest version UIFlow2 v2.3.7. Could that be related?

6427e3b2-595e-4456-a647-1395a76d634d-image.png

But when I add a single "GET" command, this error occurs at startup.

b6971018-763d-4c4a-88ec-fcc4a5f7a333-image.png

0c33d82b-4dd9-4eec-bf80-15af19f49716-image.png

Thanks in advance for replying, I have several open messages and no one is answering.

]]>https://community.m5stack.com/post/30163https://community.m5stack.com/post/30163Tue, 11 Nov 2025 17:46:35 GMT<![CDATA[Reply to unit hbridget v1.1 on Fri, 24 Oct 2025 17:45:29 GMT]]>Hello @Bat21

hmm, not completely sure what the issue is. I am running your example code in UIFlow2 v2.3.7 and when I press BtnA it cycles through Frwd, Rvrs and Stop just fine.

An attached battery seems to show the correct battery state as well.

Could you please cut down your example to the minimum showing the issue you are describing?

Thanks
Felix

]]>https://community.m5stack.com/post/30085https://community.m5stack.com/post/30085Fri, 24 Oct 2025 17:45:29 GMT<![CDATA[Reply to unit hbridget v1.1 on Fri, 03 Oct 2025 16:21:07 GMT]]>@Bat21
This is de proyect.

Este es el proyecto

https://uiflow2.m5stack.com/?pkey=b0d334240ade47ed9da0f31549677850

]]>https://community.m5stack.com/post/30030https://community.m5stack.com/post/30030Fri, 03 Oct 2025 16:21:07 GMT<![CDATA[Reply to unit hbridget v1.1 on Tue, 23 Sep 2025 15:54:34 GMT]]>@Bat21
Hello everyone,
How can I share the project so I can see if you can help me with the error I mentioned?

Thanks.

Hola a tod@s,
Como puedo compartir el proyecto para ver si me echáis un mano con el error expuesto.

gracias.

]]>https://community.m5stack.com/post/29994https://community.m5stack.com/post/29994Tue, 23 Sep 2025 15:54:34 GMT<![CDATA[Reply to unit hbridget v1.1 on Mon, 15 Sep 2025 15:44:54 GMT]]>@Bat21hello to tod@s
There are no answers to this incident?

Am I doing something wrong?

]]>https://community.m5stack.com/post/29948https://community.m5stack.com/post/29948Mon, 15 Sep 2025 15:44:54 GMT