M5GO MPU9250 does not work at all
-
Hello,
I am trying the example of "MPU 9250 Basic AHRS.ino" with M5GO, but the detection value does not change even if moving the unit.
Log of Serial Monitor is below,
ax = 78.12 ay = -1905.15 az = 1003.85 mg
gx = 9.77 gy = -238.14 gz = 125.48 deg/s
mx = -470 my = -120 mz = -125 mG
q0 = -0.74 qx = 0.62 qy = -0.05 qz = -0.25
Yaw, Pitch, Roll: 10.93, 22.77, -75.66
rate = 9097.85 Hzax = 78.12 ay = -1905.15 az = 1003.85 mg
gx = 9.77 gy = -238.14 gz = 125.48 deg/s
mx = -470 my = -120 mz = -125 mG
q0 = -0.63 qx = 0.48 qy = 0.21 qz = -0.57
Yaw, Pitch, Roll: 65.29, 16.76, -61.87
rate = 9099.84 Hzax = 78.12 ay = -1905.15 az = 1003.85 mg
gx = 9.77 gy = -238.14 gz = 125.48 deg/s
mx = -470 my = -120 mz = -125 mG
q0 = -0.46 qx = 0.28 qy = 0.40 qz = -0.74
Yaw, Pitch, Roll: 105.90, 2.25, -58.74
rate = 9121.63 Hz
...I want to know if this condition is normal.
Regards,
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login