How to use COM.X Sigfox with M5Stack and M5Core2
-
Hello.
I purchased M5stack Basic and Core2.
I want to connect COM.X Sigfox to this and communicate with sigfox.
So I installed the Arduino IDE, USB serial driver, board definitions and libraries on my PC. And
I tried to write a sample sketch to get ID / PAC information to M5stack.M5stack Basic was successful.
The following error message was displayed on M5stack Cors2.
File "esptool.py", line 3682, in <module>
Serial port COM3
File "esptool.py", line 3675, in _main
File "esptool.py", line 3329, in main
File "esptool.py", line 263, in init
File "site-packages \ serial \ __ init__.py", line 88, in serial_for_url
File "site-packages \ serial \ serialwin32.py", line 62, in open
serial.serialutil.SerialException: could not open port'COM3': WindowsError (2,'\ x8ew \ x92 \ xe8 \ x82 \ xb3 \ x82 \ xea \ x82 \ xbd \ x83t \ x83 @ \ x83C \ x83 \ x8b \ x82 \ xaa \ x8c \ xa9 \ x82 \ xc2 \ x82 \ xa9 \ x82 \ xe8 \ x82 \ xdc \ x82 \ xb9 \ x82 \ xf1 \ x81B')
Failed to execute script esptool
When Basic is connected to the PC, it is connected to com3 in Device Manager, but when Core2 is connected, it is com7. Something is wrong.
What should I do? please tell me. Thank you.
-
Hi @takero I've replied to you by email regarding this issue in order to conduct some extra tests :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login