[Core2] Home Assistant remote
-
Hi there!
I just wanted to let you know that I am working on a Home Assistant remote control using an M5Stack Core2. My aim is to control the smart appliances I have (lights, blinds, and music) via the M5.
The software is written in micropyton using the micropython firmware developed by M5Stack. For the interface I use LVGL which is available by default in the M5Stack Micropython builds, and for the connection with Home Assistant I use the MQTT protocol.
There is still quite some work to be done, but I have a working interface which can control the light's states and attributes. I have some plans of my own to improve this project as it is now, but I would also like to know if you have any good suggestions on how to improve my project.
The code is available on GitHub (link below) and I encourage you to have a look/install it on your own device. At this moment I don't have instructions on how to add this to your device just yet, but I hope to make it soon!
https://github.com/hugobloem/M5Stack_HomeControl
Cheers,
Hugo -
cool !
-
Hello,
Very nice, I've the same idea, to use M5Stack as a monitor that works with HomeAssistant and MQTT. I'll take a look at your repo.
Best regards
-
Can't wait to test it!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login