M5 Base pogo pin dimensions or CAD file
-
Hi there, I have an I2C sensor I want to interface to the pogo pins on the bottom of the M5Go Bottom2.
https://docs.m5stack.com/en/base/m5go_bottom2I can see they are 0.1" pitch, but there are some plastic nubs and a small screw hole nearby for positioning.
Does anyone on here know where I can find the dimensions of the pogo pins and all of the details surrounding the pins (marked in red on the picture below)? This will greatly help in using Fusion360 to design a bracket which holds the sensor and interfaces it with the pogo pins.
Thanks in advance.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login