M5-Stamp-Pico with I-PEX external antenna port
-
Hi everyone,
I'm new here... and yes I did extensive searches ;)I have 3 x Stamp-pico modules whichI specifically bought for their terrific size and dual core.
-- as experiment for an outdoor box controlling temp/humidity sensor and a couple of ws2812b strips mounted in a plastic "falcon" flying out front of my unit. I'm controlling the LEds (only 30) via core 1.However, I need the range of an external antenna.
I have other esp32 boards with an I-Pex port including an esp32-wrover-IE which is great for development, but they're all too big.
I notice there are others here looking for similar solution.
So, I would would like to suggest there is a market for a Stamp-Pico with an an I-PEX rather than 3D antenna.Please let know if this suggestion gains any traction toward becoming a reality.
In the meantime, could anyone from your Tech Team please suggest how I might modify a Stamp-pico?
TIA,
Chris -
@chrismal Hi Good day! We appreciate your feedback!No IPEX version is available
-
@m5stack_ag G'day, Thanks for reply.
Any chance I could get a few technical tips please...For example;
If I were to take the 3D antenna off, which solder points are which?
-- to use for, say, a tiny coax to an SMA mounted on PCB.I can't tell from circuit diagram and I don't know if the Stamp is printed to indentify the points under the 3D.
A photo with pointers would be useful ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login