IoT Base CATm - Core2 restarts every 3-5 min or so
-
Re: Core2 keeps rebooting with PoE base
I’m guessing this is probably the same/similar issue I’m having with my Core2 and the IoT CATm base?
What exactly do I need to do here? Please help :)
-
Hello @iamjameshannam
the issue described in
Core2 keeps rebooting with PoE baseis an immediate reboot cycle within a couple of seconds (and not after a few minutes). So, no, I don't think this is the same issue.Can you describe what software you are running on your M5Core2? UiFlow? Arduino?
Are you running from external power or battery?
Thanks
Felix -
Hello @iamjameshannam
do you have a SIM card in your IoT Base CatM module?
I did some testing and from within UiFlow it seems that as part of the module initialization (e.g.
catmiot = module.get(module.CATMIOT)) anAT+CPIN?command is sent repeatedly (about every 6 seconds) until the module response is+CPIN: READY. Without SIM card the module response isERRORwhich means the program flow is blocked forever.Thanks
Felix
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login