Newbie Question
-
I have just bought MStick C Plus, Core 2, and a few more. Finding the learning curve crazier than I first thought. I can use M5Burner but none of the demos other than Factory Test work properly. They load and run but only occupy a small portion of the MStick C+ screen.
What am I doing wrong?
BTW...it would be gr8 to have a newbie section on this forum. The next issue I face is getting the Arduino IDE to run
-
@zappawaddawadda Hi! There is an excellent tutorial on the first page of the M5StickCPlus documents page here:
https://docs.m5stack.com/en/core/m5stickc_plus
This is for the older Arduino ver 1.8.19 and is the easiest to use, IMHO.
You get close to "machine level code" with the IDE which also accidentally teaches you C and C++ as you go along.
If you have any difficulty, post a reply here!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login