What is the best Dupont cable size to use with ESP32 Core and Core 2 controllers?
-
I noticed when searching Google most Dupont cables are 2.54mm is this the best size for a snug connection on the various M5Stack controllers?
-
use GROVE cables for the sensors one comes with every sensor. The MBus interface at the bottom of the core2 is not intended to connect by Dupont lines. If you want to tinker additional hardware to M-Bus then one of the PROTO module might be useful. It adapts the Bus to 2.54mm (0.1") spaced solder points. You are free to use Dupont from there.
-
DuPont or 2.54 is the standees size for headers and connectors. For the ‘-Bus internal connector you need an I/o breakout board or base as the connector is shallow to save space.
-
Thanks folks.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login