Connecting GPS Module with u-center
-
Hello
is here anyone who could support me, how I can connect or what I have to do to see the complete data provided by the GPS module in the u-center software.
Thanks for help in advance
Olaf
-
Hi @osioli,
You can upload to the core first this code (I'm using the Gray core):
#include <M5Stack.h>
HardwareSerial GPS(2);
void setup() {
GPS.begin(9600);
Serial.begin(115200);
}void loop() {
for (;;) {
if (GPS.available() > 0)
Serial.write(GPS.read());
if (Serial.available() > 0)
GPS.write(Serial.read());
}
}In u-center set the baud rate to 115200. Go to View-Messages View (F9), expand UBX-CFG-MSG and check UART1.
In my case the satellites detection only works outdoors.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login