PORT C with Core2 + M5GO Battery Bottom2 : 5V UART OK ?
-
Hi there
I've a Core2 with a M5GO Battery Bottom2 which exposes Serial2 (pin 13 and 14) on PORTC as well with 5V and GND. This is great to connect to a 5V UART module but I can't find in the specifications if the Rx pin on PORTC is OK with 5V
I google searched this but could not find any suitable M5Stack blessed documentation.
Any clue ?thx
-
Hello @jmarduino
RX and TX on Port C are directly connected to ESP32 GPIO13 and GPIO14 and therefore 3.3 V only. Bottom2 schematics is here.
Thanks
Felix -
The Core2 with the M5GO Battery Bottom2 is a sweet combo! As for the Rx pin on PORTC, it's essential to check the specs to be sure about that 5V compatibility.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login