EN pin.
-
What is the EN pin supposed to be?
On my ESP32C3 I measure VCC (3.3V)
But on my ESP32S3 I measure 4.6V (with a 3.30V VCC, and 5.01V USB power.)
The latter I find very strange?
-
So, the 4.6V is consistent with the schematic for the Stamp-S3, I see.
The EN is connected to VIN, not VCC, via a diode, which drops it a little below the 5V from USB.
This is different from the Stamp-C3, but I guess that's fine.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login