Commercial product based on M5Stack Core
-
Hi,
I have a project using DS18B20 temperature sensors and water flow meter.
My prototype is based on M5 core2 and is working fine.
Now I plan to commercialize a product based on that prototype.
I want the users to get a plug and play device, so I want to sell them the core + cables + sensors, easy to plug and start.
I think I do not need to produce a specific board to stack on core, because the sensors only needs a pullup resistor.
May be that resistor can be integrated into the sensors cable (on the connector) ?
What is your opinion on this point?
I was thinking of making a cable that plugs into the M5core1 (basic), on the side GPIO connectors. Because Core2 only have bottom connector.
Do you think it will be easy to mass-produce this type of cable in the future ?
Thanks for your help
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login