M5Stack-Fire doesn't boot after burning UIFlow 1.14.0
-
M5Stack-Fire (SKU: K007) doesn't boot (black screen) after burning UIFlow v1.14.0 with M5Burner.
Hardware related problems can be discarded because previous version (UIFlow v1.13.9) works right in the same device.
Best regards.
-
@ti45001 Are you burning the specific correct fire/psram version?
Have you tried the specific fire/psram version of UIFlow2? -
Yes, there is only one specific UiFlow firmware for the M5Stack-Fire.
Problem is only related to latest UiFlow v1.14.0, previous versions (1.13.9 and below) work right.
-
@ti45001 me too.
I think this is due to the image size of the official firmware being too large, and I am waiting for it to be fixed in 1.14.1. This is because we have confirmed the same issue with M5StickCplus 2 and suspect that it is a widespread issue with 1.14.0.The following message is repeatedly output from the serial port:
E (838) esp_image: Image length 2639008 doesn't fit in partition length 2621440 E (838) boot: Factory app partition is not bootable E (840) boot: No bootable app partitions in the partition table ets Jul 29 2019 12:21:46 rst:0x3 (SW_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 271414342, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:1 load:0x3fff0018,len:4 load:0x3fff001c,len:5216 ho 0 tail 12 room 4 load:0x40078000,len:12872 ho 0 tail 12 room 4 load:0x40080400,len:3512 entry 0x4008063c
-
I confirm you that M5Stack-Fire with UiFlow v1.14.0 shows the same error at boot:
rst:0x3 (SW_RESET),boot:0x17 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:5216
ho 0 tail 12 room 4
load:0x40078000,len:14052
load:0x40080400,len:3792
entry 0x4008063c
[0;31mE (1165) esp_image: Image length 3619088 doesn't fit in partition length 3604480[0m
[0;31mE (1165) boot: Factory app partition is not bootable[0m
[0;31mE (1167) boot: No bootable app partitions in the partition table[0m
ets Jun 8 2016 00:22:57
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login