M5stack timer camera error: cam hal: ev-eof-ovf
-
Subject: "CAM HAL: EV-EOF-OVF Error – OV3660 Freezing After 5-10 Seconds"
Hi everyone,
I'm using an M5Stack camera with the OV3660 sensor, and I'm experiencing an issue where the camera freezes after 5-10 seconds. The serial monitor repeatedly shows:
CAM HAL: EV-EOF-OVF
After resetting, the camera works for a few seconds but then freezes again with the same error.
My Setup:
Camera Module: M5Stack OV3660
Power Supply: Stable 5V, 2.1A
Firmware: camera web server
Frame Size: UXGA (1600x1200), SVGA (800x600), QVGA (320x240)
PSRAM: Enabled
fb_count: 1 / 2
Troubleshooting I've Tried:
✔ Reduced frame size (tried QVGA, SVGA)
✔ Set fb_location = CAMERA_FB_IN_PSRAM
✔ Adjusted jpeg_quality (tried 10, 12, 15)
✔ Increased fb_count to 2Despite these changes, the CAM HAL: EV-EOF-OVF error still occurs, leading to camera freezes.
Could this be a buffer overflow, PSRAM issue, or something else? Any help would be greatly appreciated!
Thanks in advance.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login