CoreS3 tensile test, Plot load vs. displacement
-
Hi! I would like to get your assistance/assessment on a project :)
Specifically if it is doable with UIflow2 or if I need to switch to micropython?I have:
M5stack core s3
M5stack Unit weight-I2C
M5stack Stepmotor Driver Module 13.2 v1.1
10kg load cell
Step motor
trapzodial rod T8x4.My aim is to build a small tensile test machine and plot displacement vs. load.
Basically:
*calibrate load cell with known weight.
*Tare
*Move load cell by stepper and count step(i.e displacement)
*Poll load cell
*Stop at a set max load
*Save load vs disp in a csv-file
*Reverse motor back to org positionAnd a graphic on the display showing buttons for calibrate, tare and start.
Best regards, H
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login