M5Stack Core2 will not enter download mode
-
I am trying to burn new software into my new Core2 using M5burner. I have tried using an apple Mac and PC Window 10). With both I can open the serial monitor and reboot the Core from the PC/Mac. I have tried several USB cables including one I use for a USB hard disk.
No matter what I do I get the same error reported that the Core is not in USB mode so the flash fails.
I have tried holding the reset button while plugging in and the documentation offers no other clues.
I have double checked I have the right usb driver and rebooted everything.
It may be a faulty core2 but would appreciate any pointers before I return it.
-
have you tried to use M5Burner and "erase" option first? have you tried to load any simple Arduino code? or any available EasyLoader project from M5 product page?
-
@richardd672 a mi me sale JTAG/serial debug unit no piuerto com dicen que es probelma de firmware
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login