Загрузка кастомной прошивки через uiflow2 на M5Stick plus2
-
Здравствуйте, что делать если при попытке установить прошивку на M5Stick Plus2 через UIFlow2 в консоли вылетает такая ошибка? :
COMMAND: ERROR: Command not found at '' # -
@MurzikYEET I'm not sure as google translate may have got the translation wrong but have you tried the offline app?
M5Burner
Google Translate: Я не уверена, возможно, Google Translate перевел неправильно, но вы пробовали использовать приложение в автономном режиме?
Hope that helps
RPi -
@RPI25 What?
-
@RPI25, how to download offline app?
-
@MurzikYEET Use the link to the Burner: https://docs.m5stack.com/en/uiflow/m5burner/intro
Then select and download the version for your computer.
Run the app.
Select the M5Stick Plus 2 from the left side bar.
Select the top firmware (official) and click download then burn.
If required, sign in and then configure the settings before waiting for the burn to finish. Then try on UIFlow 2.0 again.
Hope that helps,
RPi -
@RPI25 how to fix this errors??
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login