Color Sensor RGB Unit UI 1.3.2 (TCS3472) / R G B Data always on 0
-
My sensor only shows me the RAW data.
The values of R G B (single) are always 0.UI V1.3.2 / V 1.4.0
Contains a calibration table which is probably wrong:
- values smaller than 0 must be set to zero
If the calibration table matches the integration time of 154 MS. The Arduino example assumes 50 MS.
3 The module reacts logarithmically. So it should not be approximated with a 3rd degree function !
Could this be checked?
I would like to make an instruction video on my Youtube channel (UI Flow),
but I can't get any further.Alf
- values smaller than 0 must be set to zero
-
Contact me after 6pm GMT on Discord and I will see what I can do.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login