Looking for the Base Firmware for Unit-V
-
I'm looking for the Base Firmware for Unit-V, I was experimenting and have made a mistake with the unit-v and would like to know where I can get the base firmware so I can reflash to its default.
Thanks
-
-
Is there a correct way to flash the firmware using esptool i'm using esptool.py --chip esp32 --port /dev/tty.SLAB_USBtoUART --baud 115200 write_flash -z 0x1000 M5StickV_Firmware_v5.1.1_beta.kfpkg becuase even though it seems to flash I cannot connect with Maixpy i'm getting the following Connect fail, board ide mode no ack
Any tips would be appreciated.
thanks Kyle
-
Esptool can't flash it, its not an esp chip
You need stickV burner from guides sectionhttps://docs.m5stack.com/#/en/core/m5stickv
EasyLoader is
-
the M5StickV/UnitV burn firmware tutorial
https://docs.m5stack.com/#/en/quick_start/m5stickv/m5stickv_quick_start
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login