Application M5Stack Demo-Board (Factory-Test)
-
Hello, M5Stack team,
received my M5Stack demo board today.
What I noticed now, the program Factory-Test from Github is faulty, it only works until function 6 then it doesn't work anymore. The same behavior with EasyLoader
Please can you check the code !?Greetings skink
-
The IOT Demo Board?
https://m5stack.com/collections/m5-application/products/iot-learning-kit
-
Yes it is the IOT Demo Board,
the first error when compiling is this !!
See picture ->
Greetings skink! !
-
Here my board, got yesterday !!
Greetings skink! ! -
The test of the individual components works.
But the factory test already aborts with an error message when compiling!Can you check that !?
Greetings Reiner
-
Try deleting the circle at the beginning of the line.
-
@ajb2k3 said in Application M5Stack Demo-Board (Factory-Test):
Try deleting the circle at the beginning of the line.
I've already done that, erased the circle in front of the bracket.
But nevertheless it runs only up to function 6!Just found out, that I get the following error message working with Arduino 1.8.9 when I load the code into Arduino !!
Error message : "MFRC522_i2C.cpp" contains unknown characters. If the code was created with an older version of Arduino, you might want to use Tool -> Correct Coding & Reload etc. etc. to correct the code.But even afterwards the program runs only up to function 6!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login