-
My wifi setup requires user name and a password to be entered. Uiflow firmware is just asking for password, there is no input for username? How can I connect my M5fire in such setup?
-
When you connect to your wifi on a mobile or desktop device does a webpage appear asking you to input username and password to connect? If its a portal the only way to get around it would be to connect a computer, preferably something like a raspberry pi and create a seperate access point from that device
-
My connection does not lead to me a portal but it is WPA-Enterprise requesting both a user name and password.
-
currently there is no way to use m5stack with wpa-enterprise. Perhaps you could change your routers settings by entering its ip address in your browser, its usually something like 192.168.1.1, 192.168.1.2, 192.168.1.0 etc.. depending on your router manufacturer
-
@lukasmaximus Thanks Lukas. Created a mobile wifi and tethered usb connection. Now it works. Sometimes it requires couple of tried to upload the code but it is ok.
-
@hetzer sorry you had to use your mobile phones hotspot to get around it. We will look into the possibility of connecting to wpa-enterprise hotspots. For now if you are a windows or linux user you can download the offline version by going to m5stack.com then clicking explore>download>desktop ide
-
@lukasmaximus Thanks Lukas. I had posted in another subject. The desktop ide does not allow me to create variable. I see the icon put does not open the pop up screen to name the variable.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login