M5burner not working
-
When i first opened the box and connected the product (dial), i installed the M5burner and installed a system. When i wanted to change systems after that, it just said: "--chip auto --port COM18 --baud 1500000 --before default_reset write_flash -z 0x000 C:\Users\kary7\Downloads\M5Burner-v3-beta-win-x64\packages\firmware\6281119d9035fe676ae6844558047cdf.bin
esptool.py v4.10.0
Serial port COM18
Connecting...
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.A fatal error occurred: Failed to connect to Espressif device: Invalid head of packet (0x08): Possible serial noise or corruption.
For troubleshooting steps visit: https://docs.espressif.com/projects/esptool/en/latest/troubleshooting.html" -
@GiovanniCaenazzo
disconnect M5Dial
press and hold boot button at the back ofM5Dial - in the middle of Stamp Controller - it is very gentle switch
connect M5Dial to USB
M5Burner should detect com port in boot mode
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login