Unit CamS3 and MicroPython
-
Hi,
I wish to program Unit CamS3 using MicroPython but when I flash them using this:
I ge this shell message in Thonny even before I start to program:
PROBLEM IN THONNY'S BACK-END: Internal error (serial.serialutil.SerialTimeoutException: Write timeout).
See Thonny's backend.log for more info.
You may need to press "Stop/Restart" or hard-reset your MicroPython device and try again.Process ended with exit code 0.
────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────
PROBLEM IN THONNY'S BACK-END: Internal error (serial.serialutil.SerialTimeoutException: Write timeout).
See Thonny's backend.log for more info.
You may need to press "Stop/Restart" or hard-reset your MicroPython device and try again.Process ended with exit code 0.
As "Stop/Restart" cycles does not solve, any idea how to solve it? and to start programming?
-
@l-roca
This is not a Micropython firmware. You might need to configure and flash the firmware yourself: https://micropython.org/download/ -
@kuriko Thanks. How can I do it?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login