M5Stack Fire core + Plus + M5GO base = psram fails on boot
-
If I stack core+base or core+plus works good. If I stack all of the three it fails to boot
Rebooting... ets Jun 8 2016 00:22:57 rst:0xc (SW_CPU_RESET),boot:0x17 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3fff0030,len:4 load:0x3fff0034,len:5652 load:0x40078000,len:13136 load:0x40080400,len:4356 entry 0x400806b0 E (1085) psram: PSRAM ID read error: 0x3141ba1a E (1085) spiram: SPI RAM enabled but initialization failed. Bailing out. E (1086) spiram: SPI RAM not initialized Re-enable cpu cache. abort() was called at PC 0x400f4dbe on core 0 Backtrace:0x40095ec5:0x3ffe3b60 0x400964b5:0x3ffe3b80 0x4009a6a9:0x3ffe3ba0 0x400f4dbe:0x3ffe3c10 0x400f4e0f:0x3ffe3c30 0x400829ee:0x3ffe3c50 0x400821d3:0x3ffe3c70 0x40078fd0:0x3ffe3c90 |<-CORRUPTED ELF file SHA256: b95ed270e1e6b8a7 Rebooting...The same happens using plain esp-idf, arduino or micropython. I tried many settings (DIO-QIO... changing mhz... and so on) without any result.
What can I do to make it works using core+plus+base ?
-
Hello @anichang
just wondering - maybe the issue isn't specific to PSRAM but with the power supply? I'd try a different power supply and/or shorter USB cable.
Thanks
Felix
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login