UIFlow 1.7.6
-
@felmue I took it that it was for the core 2 as it has the different case shape and the longer Mbus header pins
-
@doswiadczalnik now it fixed. you could remove the old firmware file then download again.
-
8Servos hat intermittent response with 1.7.6
UIFlow, so easy an adult can learn it!
If I don't know it, be patient!
I've ether not learned it or am too drunk to remember it!
Author of the WIP UIFlow Handbook!
M5Black, Go, Stick, Core2, and so much more it cant be fit in here! -
@m5stack when we gonna see UiFlow with zigbee Init and COM ?
-
@ajb2k3 could you share your code here? it would helpful for us to debug it.
-
@mati It is in our support plan and will be supported in future updates. so maybe after a few weeks, it will be supported.
-
@m5stack thx, maybe some day uiflow will be able to support new HW at rls day ;)
-
I cannot get a QRCODE for the Cloud with the UNITCAM examples.
-
I use weight unit for port A and the GOPlus2 Base at the same time. it seem like it cant work together,When i trigger the server motor ,my weight unit dont work anymore,the label keep show 0 ,i think maybe is I2C issue ,any ideas?
thx
skyler -
?????????
-
@kmart93179 weight unit is not used the I2C protocol of course they not compatible.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login