M5StickCPlus No Sound from Internal Buzzer
-
I must be missing something but I cannot seem to get any sound out of CPlus internal buzzer. I'm not sure if the Speaker Commands pertain to the internal buzzer or only the external hat speaker. I am using UIFlow but can do an Execute command if necessary.
I have been playing with the Core2 for awhile but just got a StickCPlus today so a little clueless regarding it.

Any suggestions would be greatly appreciated.
Thanks
-
@se Ok I found that the buzzer is connected to GPIO2 so used a PWM and am able to get a very low volume tone out if it. So, can someone tell me how to get a usable audio level out of this little buzzer.

Thanks
-
Here is a project I built with the M5StickCPlus that uses the buzzer.
https://github.com/bstein2379/M5StickC-Plus-Ringtone-Jukebox
I set freq=100 and duty=0
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login