Core2 kmbusmode
-
When I use m5stack core2 with mbus as Input and 5v input, serial2 does not work and the microcontroller shuts down. m5stack core2 with mbus as Output and 5v input to BAT pin works fine.Is there a problem if I use 5V input to the BAT pin of m5stack core2?
-
Hello @mu0104
that doesn't sound right. I have an M5Core2 which is solely powered via the 5 V input from the stacked COM.X module and the communication between the two uses Serial2 (aka GPIO13 and GPIO14) successfully.
Do you care to share your code?
Thanks
Felix
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login