Error : can't create thread
-
I want to UIFlow in M5Stack to record my data.
Launch the MQTT broker of Node-RED in the local environment, and M5Stack communicates with MQTT.
I want to know the operation status of machine by connecting the ADC unit to M5Stack and sending the data to the Node-RED once every 5 seconds and graphing it.
After working well for about 9 hours, the following error occurred and the data could not be retrieved. Error : "can't create thread"Please let me know if you solved the same problem.
-
@kawabatapaper Hi there! Can you please provide the program? and also every time the error occurs in about 9 hours?
-
Thank you for your message.
I posted my program.
I got an error in the same time several times in this program.
So, I measured the sensor value every 5 seconds, but I extended it every 10 seconds.
I don't know if that was good, but so far it hasn't stopped for 3days.
Please let me know if there is anything else you know.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login