Stack is dead :(

[snmcma]

after flashing the device, the device does not turn on!

http://forum.m5stack.com/topic/67/micropython-on-webide-1-prepare-and-hello-world

how to revive the device?

how to flash the device in its original state and discard the micro python?

[snmcma]

This post is deleted!

[m5stack]

press the button A when reset, pls try

[snmcma]

how to flash the device in its original state and discard the micro python?

[m5stack]

you mean Arduino?

[snmcma]

@m5stack 在 Stack is dead :( 中说：

you mean Arduino?

Yes, Arduino

[Kryten]

Have you tried to reflash using sepressif flashing tool and FW that are on github?

[snmcma]

@kryten

no, need an instruction

[Kryten]

http://iot-bits.com/esp32/esp32-flash-download-tool-tutorial/

I think you should be able to flas stock esp and run via arduino after. I have done it with esp8266

[snmcma]

@snmcma 在 Stack is dead :( 中说：

@m5stack 在 Stack is dead :( 中说：

you mean Arduino?

Yes, Arduino

can throw off the firmware file for overwriting in m5? and a screenshot how to write down

you can throw off all the firmware files with the instruction how to return to the initial state, micropyton does not suit me. I reprogrammed it as an esp32 dev module, unfortunately in m5stack mode it is not programmed