Stack is dead :(
-
after flashing the device, the device does not turn on!
http://forum.m5stack.com/topic/67/micropython-on-webide-1-prepare-and-hello-world
how to revive the device?
how to flash the device in its original state and discard the micro python?
-
This post is deleted! -
press the button A when reset, pls try
-
how to flash the device in its original state and discard the micro python?
-
you mean Arduino?
-
-
Have you tried to reflash using sepressif flashing tool and FW that are on github?
-
no, need an instruction
-
http://iot-bits.com/esp32/esp32-flash-download-tool-tutorial/
I think you should be able to flas stock esp and run via arduino after. I have done it with esp8266
-
@snmcma 在 Stack is dead :( 中说：
@m5stack 在 Stack is dead :( 中说：
you mean Arduino?Yes, Arduino
can throw off the firmware file for overwriting in m5? and a screenshot how to write down
you can throw off all the firmware files with the instruction how to return to the initial state, micropyton does not suit me. I reprogrammed it as an esp32 dev module, unfortunately in m5stack mode it is not programmed
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login