Custom Firmware but NOT published / public
-
Hi All
I have some some custom code for the Timer Camera and I'd like to burn my .bin file using m5Burner tool but I don't want it publicly listed/available. Is this possible?
The reason I'd like to use the tool is
- I'll be getting someone else to build my devices and load the firmware and want to just supply a .bin file.
- I'm using the TimerCamRTSP official build to initially calibrate/focus the camera.
- I then need to re-flashing with my own code (I don't have or need a camera stream once deployed).
It'd be nice if this was in the one tool.
I can see how to add my .bin file but it 'appears' to publish it for everyone to see. Is this correct and can I restrict access to it?
Thanks
Rob -
Yes it's possible, you need to install ESP-IDY following the guide on there website, configure the tools and then just run the eps-tool or idf.py to upload the bin file to the camera.
-
@ajb2k3 said in Custom Firmware but NOT published / public:
ESP-IDY
Thanks but I'm asking about burning my .bin file via the m5burner tool specifically. The interface is nice and simple for a student or inexperienced employee to use and I'm using it already to burn the RTSP build before I burn mine.
I'm using VScode atm and am able to burn my build with that but would like a single tool for both burns to simplify the process.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login