How to use the ExpPort For Core2 module
-
Hi,
I have confirmed that port E is working properly. However, I can't get port B to port D up. There are only two UI Flow menu selections, Port A and Port E for an Unit. I can't find the specs for the 4 DIP switches on the ExpPort For Core2 module. I need a clearer and more polite explanation of the ExpPort For Core2 module.Thank you in advance
Hirofumi -
Do you mean this chart that is on the product page?
or the information on this page?
https://docs.m5stack.com/en/module/extport_for_core2?ref=pfpqkvphmgr -
@ajb2k3 said in How to use the ExpPort For Core2 module:
o you mean this chart that is on the product page?
Hi,
Thank you for your reply.
Of course, I understand this information, but I'm asking because it doesn't work according to the information.Thank you in advance.
Hirofumi -
Ports B and C are not controlled by the board, they are connected directly to the bus and handled directly by the core.
As to D and E which are handled by the base.
Ports B and See only. become available when you select units that require ports B and C
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login