M5Paper, SD card stuck
-
I have a brand new M5Paper and was just starting to work with jpg files on the SD card. My first attempts worked and the SD card entered and exited the slot easily enough. Then, after modifying my pictures I re-inserted the SD card and the picture didn't appear after running the sketch. I tried to eject the SD card by pushing it in, as usual, but it simply went into the casing. I cannot get the SD card out and it is blocking the way for another SD card in the slot. The only way I can think of to remove the card would be to open the case of the M5Paper. What is the best way to do that?
-
@steve1 The case is normally only held together with clips around the edge. If you use two thin plates, you can open the clips.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login