AtomS3 Loops rst:0x3 (RTC_SW_SYS_RST),boot:0x28 (SPI_FAST_FLASH_BOOT)
-
I am using the button Sample from AtomS3 example library.
Compling with Arduino IDE end ok.
Wrote 413840 bytes (232170 compressed) at 0x00010000 in 2.8 seconds (effective 1171.8 kbit/s)...
Hash of data verified.Leaving...
After pressing Reset I get following messages in Serial Monitor:
18:40:36.017 -> ESP-ROM:esp32s3-20210327
18:40:36.017 -> Build:Mar 27 2021
18:40:36.017 -> rst:0x3 (RTC_SW_SYS_RST),boot:0x28 (SPI_FAST_FLASH_BOOT)
18:40:36.017 -> Saved PC:0x403cdada
18:40:36.017 -> SPIWP:0xee
18:40:36.017 -> mode:DIO, clock div:1
18:40:36.017 -> load:0x3fce3808,len:0x44c
18:40:36.017 -> load:0x403c9700,len:0xbd8
18:40:36.017 -> load:0x403cc700,len:0x2a80
18:40:36.017 -> entry 0x403c98d0For all other programs it was the same ...
How can I get out off that loop?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login