[M5Stack Core2 v1.1] COM port not found
-
Problem
OS: MacOS 13.6.3 (intel)
Application: M5Burner (latest version, on Aug 4)The serial port cann't display in M5Burner application.
Steps taken
-
Tried different IDEs, but nothing worked.
-
Switched USB cables, yet COM port was still not visible.
-
Attempt to turn the USB lead upside down when plugging into the device without success.
-
I quickly press the boot button and Serial port was able to display, but soon disappeared. I seize the opportunity to click "erase" button, but it still didn't work and show the following error.
Error message:
Erase Flash esptool.py v4.7-dev Serial port /dev/tty.usbserial-58640309931 A fatal error occurred: Could not open /dev/tty.usbserial-58640309931, the port doesn't existSolution:
After removing the base and battery, I tried the 4th option and successfully erased the firmware!!!
Question:
What are the possible casues of the issuse?
How to burn the fireware correctly?
What steps should be avoid? -
-
@surprise Have you installed the correct USB driver and made sure that its working?
-
@ajb2k3 Thank you soo much!
I turned off the VPN, and then it worked.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login